The DTCO 4.1a is the successor to the DTCO 4.1 and features dual type approval. This tachograph is suitable as a transition tachograph for retrofits and as an OSNMA tachograph for newly registered vehicles, five months after the OSNMA protocol is officially released.
Because the official “service declaration” for OSNMA was still missing at the introduction of the DTCO 4.1 in 2023, this part was withdrawn from the tachograph, and the “transition tachograph” was introduced in the interim. But now, the Gen2v2 tachograph is here as it was originally intended: the DTCO 4.1a, suitable for the OSNMA authentication protocol. VDO is the first brand to offer a tachograph with dual type approval, meaning it can be programmed during installation as:
- A transition tachograph, which complies with current legislation and applies to retrofitting for vehicles that are already registered.
- An OSNMA tachograph, for (factory) new vehicles yet to be registered, mandatory from five months after OSNMA is released. This release is expected at the end of March 2025, so the first OSNMA tachographs must be installed starting from August 2025.

The DTCO 4.1a is supplied as a transition tachograph by default. As long as the OSNMA “service declaration” is not yet in effect, the DTCO 4.1a can be used as a transition tachograph with exactly the same functionalities as the DTCO 4.1, plus several improvements.
GNSS versus OSNMA: reliable positioning
Tachographs determine vehicle location using GNSS, which requires signals from at least three satellites. OSNMA goes a step further by not only determining the position but also verifying it. This helps prevent fraud and ensures fair cabotage.
OSNMA requires four satellites, one of which is in contact with a ground station to receive decryption keys. This allows encrypted position messages to be deciphered. Due to the high signal quality, an external antenna (64.02.0006) is often required.
Additionally, OSNMA continuously calibrates the positioning, leading to even more accurate and reliable location data.

New functionalities
The DTCO 4.1a offers improvements such as better alignment with cabotage legislation, an enhanced VDO Counter for driving and rest times, and more extensive Bluetooth functionalities. With the VDO Fleet app, tachograph functions can be operated and data can be downloaded directly via a smartphone.
Configuration
The DTCO 4.1a can be used as a transition or OSNMA tachograph. Before activation, switching is possible without limits. After activation, a transition tachograph can be converted to OSNMA once, but this choice is irreversible.
Calibration reason “Block 84”
Block 84 in the DTCO 4.1a tachograph indicates whether it has been calibrated as a transition or OSNMA tachograph.
For vehicles newly registered five months after the OSNMA release, the OE DTCO 4.1a is always an OSNMA tachograph and includes Block 84 as standard. In some cases, vehicles may already be equipped with an OSNMA version before the legal deadline.
Universal DTCO 4.1a tachographs must be set as a transition or OSNMA tachograph before being put into service. The calibration determines the final status:
- No Block 84 → transition tachograph
- Block 84 present → OSNMA tachograph
This makes it immediately clear which configuration has been chosen.
Availability
The new DTCO 4.1a has been available since the end of February 2025. The DTCO 4.1 is being phased out and may continue to be used for retrofits (as a transition tachograph). For workshops, there is therefore no risk of “old stock.” Additionally, it will be possible for owners of a DTCO 4.1 to provide it with a software update and upgrade to the DTCO 4.1a.